Bedside table (Customer Comission #1)
Customer Comission #1 Step 1: Sanding For the first step to bringing this furniture back to life, I'd firstly start with sanding the surfaces. For this, I used sandpaper on the more rougher side. After I've finished sanding, I'll have to clean any dust that had accumulated while sanding. Step 2: Painting After I'm done sanding the bedside table, I'll be moving forward into the next step, painting. But before I can start painting, I'll have to make sure that the bedside table is dust-free. If I hadn't cleaned the dust off and started painting right away, the paint wouldn't stick to the table's surface (nor would it dry properly). For the paint, I used Teknos' Futura 80 primer. I used a round paintbrush and a smaller paintbrush to get those nooks and crannies of the furniture. After painting, I'd have to leave the paint to dry for at least 2 hours before I can do anything to it. Step 3: Wood filler For this step, wood filler will be used to...