-

-

Kokeilu meneillään :)

Kommentit

Lähetä kommentti

Tämän blogin suosituimmat tekstit

Lasikuitutapetin asentaminen ja ylitasoittaminen (englanniksi) 2/2

-
Kuva
I was tasked at installing a fiberglass wallpaper, so here is a step by step guide on how I accomplished this. Here is what I'll need: - Protective gloves - 50mm paintbrush - Paint rollers (a small and a big one + a corner paint roller) - Utility knife - Measuring tape - Wallpaper leveler - Spreaders (=teräslastat) of differing sizes - Scissors - Pencil - Ruler - Spirit level (=vesivaaka) - a Rag, a sponge and a bucket of water - Fiberglass wallpaper - Tasoitetapettiliima "Even" (Kiilto Pro) - Wall paint "Trend 7" (Teknos) - Universal filler "Presto LF+" (Tikkurila) Step 1: Preperations - Before I can start installing the fiberglass, I first remove and cleanup the baseboards of any leftover filler/paint, from when I had added oversmoothing/ painted the walls. For this I used a knife to remove any lumps. Then I moved onto removing any unnecessary tape from the baseboard, so installing the fiberglass would be easier. If necessary, I added tape to the sid...
Lue lisää

Rakennusten korjausmaalaus (in english)

-
Kuva
The customer had comissioned to have their panel door repainted. For this, I'll need to remove the old paint from the surface. Step 1: Removing the paint What I'll need: a heat gun paint scrapers a respirator mask protective glasses As I've mentioned before I'll need to remove the old paint. Luckily the surface is coated with is an alkyd paint, so the process of removing it wouldn't be that difficult. First thing before I start any task is for me to use a protective mask and glasses to shield myself from any toxic fumes and from anything getting into my eyes. After this I'd move onward to the task at hand, removing the paint. For this I used a heat gun to soften the paint, then I would scrape the surface with a paint scraper. Step 2: Sanding What I'll need: some sandpaper a sander a dust mask protective glasses After multiple hours of removing the old paint job, I can move onto the next step: Sanding. And before anything, I'll need protection. As before ...
Lue lisää

(Customer Comission 2#)

-
Kuva
 Customer Comission #2 Step 1: Removing paint with blowtorch For the first step, I'll have to remove the paint that's on the surface.  Since the paint is an oil-paint, which is notoriously known to be quite a hard paint to remove, I'll have to use a blowtorch and some paint scrapers to do the job. I'll also be using a respirator mask and protective eyeglasses to protect myself from toxic fumes and from anything hitting my eyes.  After hours of trying to get as much paint off as possible, the end result looks like this: Step 2: Sanding As you can see in the picture, there's still some paint left so I'll need to do some sanding. But before I can start sanding, I need to put on a dust mask and some protective eyeware. For the furniture, I'll be using a sandpaper as well as a sander (with a grit level of  P100  for the paper and P120 for the sander ) to remove leftover paint and smoothen the surface.  After I've done with the sanding process, I'll remov...
Lue lisää